Resin Adsorption Solution for Dichloropropanol-Containing Organic Wastewater Treatment
High-concentration organic wastewater is a common challenge in fine chemical, pharmaceutical intermediate, dye, and specialty chemical production. These wastewater streams often contain complex organic compounds, high COD, high salinity, and substances that are difficult to degrade through conventional biological treatment.
Dichloropropanol-containing wastewater is a typical example. Due to the presence of chlorinated organic alcohols, this type of wastewater may show high organic load, biological toxicity, and poor biodegradability, making direct biochemical treatment difficult.
To address these challenges, Sunresin provides an integrated resin adsorption solution for the treatment of dichloropropanol-containing wastewater and other difficult-to-treat organic wastewater streams.
Challenges in Treating Dichloropropanol-Containing Wastewater
In many industrial processes, wastewater containing dichloropropanol and similar organic compounds cannot be treated efficiently by conventional methods alone.
Traditional chemical treatment may require dilution, alkaline reaction, or additional pretreatment steps before biological treatment. While this approach may reduce part of the organic load, it can also introduce additional inorganic salts into the wastewater system, increasing the burden of downstream treatment.
Key challenges include:
- High COD concentration
- Strong biological toxicity
- Poor biodegradability
- Coexistence of organic pollutants and inorganic salts
- Difficulty in stable biochemical treatment
- High cost of conventional treatment processes
For these wastewater streams, a more selective and resource-efficient treatment route is required.
Sunresin Resin Adsorption Technology
Sunresin’s solution uses macroporous adsorption resin to selectively capture dichloropropanol and other organic compounds from wastewater.
Unlike chemical reaction-based treatment, resin adsorption is a physical separation process. The resin selectively adsorbs organic compounds from the aqueous phase while reducing the interference of inorganic salts such as chlorides and sulfates.
After adsorption, the loaded resin is regenerated with methanol or ethanol. The desorbed organic stream can then be sent to a distillation system, where the solvent can be recovered and reused, while the organic components can be concentrated for further treatment or resource recovery.
This process enables both wastewater purification and potential recovery of valuable organic materials.
Typical Process Flow
A Sunresin resin adsorption system for dichloropropanol-containing wastewater generally includes:
- Feed wastewater storage and pretreatment
- Security filtration
- Resin adsorption columns
- Water displacement
- Solvent desorption
- Steam stripping
- Solvent distillation and reuse
- Automatic control system
The process can be summarized as:
Wastewater enters the adsorption system after filtration. Organic compounds are selectively adsorbed by the resin, while the treated water is discharged to the next treatment step. When the resin reaches saturation, the adsorbed organics are desorbed by solvent, and the solvent-rich stream is sent for distillation and reuse.
This closed-loop design helps reduce organic pollution while improving resource utilization.
Key Advantages of Sunresin Organic Wastewater Treatment Solution
Selective Organic Removal
Sunresin adsorption resin is designed to selectively remove organic compounds from complex wastewater systems.
For dichloropropanol-containing wastewater, the resin can separate organic pollutants from inorganic salts, helping reduce wastewater toxicity and COD load before downstream treatment.
No Large Amount of Additional Chemicals
Compared with chemical treatment methods, resin adsorption does not rely on large-scale chemical reactions to remove organic pollutants.
This helps avoid introducing additional salts into the wastewater system and reduces the burden on subsequent treatment units.
Solvent Regeneration and Resource Recovery
After adsorption, the resin can be regenerated using methanol or ethanol.
The desorption liquid containing organic compounds and solvent can be sent to a distillation system. Through distillation, the solvent can be recovered and reused, while the organic components can be concentrated for further recovery or disposal.
This approach supports waste reduction and resource recovery in industrial wastewater treatment.
Stable Continuous Operation
Sunresin resin adsorption systems can be designed for continuous industrial operation.
By using multiple adsorption columns, the system can maintain stable treatment performance while one column is under regeneration. This ensures continuous wastewater processing and improves operational reliability.
Integrated Equipment and Automation
Sunresin provides not only adsorption resins, but also complete system solutions.
The system can integrate resin columns, tanks, pumps, pipelines, valves, instrumentation, solvent regeneration units, and automatic control systems. PLC-based control enables automatic switching between adsorption, washing, desorption, and regeneration steps.
The modular equipment design helps reduce installation complexity, shorten project implementation time, and improve operation and maintenance efficiency.
Application Scope
Sunresin resin adsorption technology can be applied to a wide range of difficult-to-treat organic wastewater streams, including:
- Dichloropropanol-containing wastewater
- Chlorinated organic wastewater
- High-COD chemical wastewater
- High-salinity organic wastewater
- Pharmaceutical intermediate wastewater
- Dye and pigment wastewater
- Solvent-containing wastewater
- Fine chemical wastewater
The technology is especially suitable for wastewater systems where conventional biological treatment is limited by toxicity, salinity, or poor biodegradability.
From Wastewater Treatment to Resource Utilization
Modern industrial wastewater treatment is no longer only about pollutant removal. Increasingly, customers are looking for solutions that can also support resource recovery, cost reduction, and sustainable production.
Sunresin resin adsorption technology provides an effective route for this transition.
By selectively adsorbing organic pollutants and regenerating the resin with recoverable solvent, the system can reduce wastewater treatment pressure while creating opportunities for recycling valuable organic components.
This makes the solution suitable for industries seeking both environmental compliance and improved process economics.
Sunresin Integrated Solutions for Organic Wastewater Treatment
Sunresin has extensive experience in adsorption and separation technologies for industrial wastewater treatment.
Based on its capabilities in resin material development, process design, equipment manufacturing, and engineering implementation, Sunresin provides customized solutions for complex organic wastewater applications.
For each wastewater system, Sunresin can support customers with:
- Resin selection
- Process evaluation
- Pilot testing
- System design
- Equipment integration
- Automation control
- Operation optimization
Through the combination of advanced adsorption resin, solvent regeneration, and integrated equipment systems, Sunresin helps customers improve wastewater treatment efficiency, reduce environmental impact, and explore the value of resource recovery.
Supporting Sustainable Industrial Wastewater Management
As environmental standards become increasingly strict, industries need wastewater treatment technologies that are efficient, stable, and economically viable.
Sunresin resin adsorption technology offers a practical solution for dichloropropanol-containing wastewater and other difficult-to-treat organic wastewater streams.
By combining selective adsorption, solvent regeneration, continuous operation, and integrated equipment design, Sunresin supports customers in achieving more reliable and sustainable industrial wastewater treatment.
Free Quote
Resources
Adsorbent Resin
Bio-Pharmaceutical & Life Science
Enzyme Carriers
Hydrometallurgy ＆ Mining
Chelating Resin
Chemical Industry
Chromatographic Media
Wastewater Treatment＆Reuse
Food & Beverage Industries
Ion Exchange Resin
Civil & Industry Water Treatment
Equipments And Projects
Plant Extraction
Catalyst Resin
Solid Phase Peptide Synthesis
Product
Application
Contact Us
Sunresin Park,No.135, jinye Road, Xi’an Hi-tech Industrial Development Zone, Shaanxi-710076, China
seplite@sunresin.com
seplite_europe@sunresin.com
+86-29-89182091
Our Product List
Amino Acid Separation and Purification
Mobile Sorption Module for Gold Extraction
PFAS Removal
Bio-Pharmaceutical & Life Science
Modern biopharmaceutical technologies typically use biological microbial fermentation...
Chemical Industry
Purification of chemical compounds has become a vital part of most industrial processes.
Drinking Water Treatment
Drinking water is essential to life. Every day every human being has to drink and use water for food preparation.
Food & Beverage Industries
Food is closely related to everyone, and the finishing of food comes from people's relentless pursuit...
Hydrometallurgy ＆ Mining
Hydrometallurgy is a technique for extractive metallugry involving the three general area...
Direct Lithium Extraction (DLE)
Sunresin is the major DLE lithium sorbent producer in China which mainly used for extraction lithium from salar brine and geothermal brine etc with high efficiency.
Industry Water Treatment
There are many uses of water in industry and, in most cases, the used water also needs treatment to render...
Plant Extraction
Plant Extraction is a process to gather the trace bioactive compounds from the tissue of a plant.
VOCs Treatment
With the widespread use of chemical products in the industry, more and more organic...
Wastewater Treatment
Wastewater treatment is the process of converting wastewater into an effluent that can be discharged
Latest News
26
2026 05
Sunresin Completes Strategic Investment in FENGXINZE to Further Expand Industrial Chromatography Business
Sunresin recently completed a strategic investment in FENGXINZE, further expanding its business footprint in industrial chromatography and strengthening its presence in the life science separation and purification sector.
13
2026 05
Sunresin Showcases Global Environmental Solutions at IFAT Munich 2026
IFAT Munich 2026 marked Sunresin’s largest overseas exhibition of the year. The company unveiled a newly designed custom-built booth featuring a modern, open, and international design concept, comprehensively showcasing its technologies and application solutions in environmental protection and resource recovery.
07
2026 04
Sunresin Selected for Morgan Stanley’s “China Best Business Models 2.0” List, Recognized for Strong Competitive Advantages
Sunresin (300487.SZ), a global leader in adsorption and separation materials, has been selected for Morgan Stanley’s “China Best Business Models 2.0” list.
Leave a Message
Please send any questions you want to know, we will reply to you immediately.
Choose File
Submit