SEPLITE® LX6703
SEPLITE® LX6703 is an acrylic, macroporous type weak base anions resin.
Acrylic matrix polymer resin with good physical and chemical properties, suitable for the purification of lactic acid, citric acid, tartaric acid, malic acid and other organic acid products. At the same time, the resin has high volume exchange capacity, better functional group stability in high temperature environment, larger feed and liquid processing capacity, and lower regenerant consumption, which is especially suitable for continuous separation systems with large loads.
Physical and Chemical Characteristics:
| Matrix | Macroporous type acrylic copolymer |
| Physical Appearance | Light yellow to yellow opaque spherical spheres |
| Shipping form | Free base |
| Particle range | 0.315- 1.25 mm |
| Bulk density | 0.65-0.75 g/ml |
| Density | 1.07- 1. 12 g/ml |
| Total capacity | ≥ 2.8 eq/L |
| Moisture Content | 50-60% |
| Whole beads count | ≥ 95% |
| Operation temp. | ≤65C |
Precautions:
Resins should be stored in sealed containers or bags where temperature was above 0℃ in dry conditions without exposure to direct sunlight. Do not mix ion exchange resin with strong oxidizing agents; otherwise it will cause violent reactions.
In case of eyes contact with resins, rinse eyes immediately with plenty of water, and consult a specialist.
Material and samples must be disposed according to local regulations.
Dry polymers will expand when become wetted and may cause an exothermic reaction.
Spilled materials may be slippery.
SEPLITE® and Monojet™ are registered trademarks of Sunresin New Materials Co. Ltd.
.This information is general information and may differ from that based on actual conditions. For more information about SEPLITE® resins, please contact SUNRESIN® directly.
Contact Us
