SEPLITE® Monojet™ SA8500U
SEPLITE® Monojet™ SA8500U Ion Exchange Resin is a high-purity, high-capacity resin with uniform particle size designed specifically for the primary, second loop or polishing stage in the ultrapure water preparation. This resin could be available in both OH- form and Cl- form, the ionic conversion rate of OH- form is up to 95%.
The resin is normally paired with SEPLITE® Monojet™ SC7700U in H+ form in mixed bed system.
SEPLITE® Monojet™ SA8500U High Capacity Resin Physical and Chemical Characteristics:
| Physical and Chemical Characteristics | |
| Matrix Structure | Gel, Styrene-divinylbenzene |
| Functional group | Trimethylammonium |
| Shipping form | OH- |
| Physical Appearance | White to yellow translucent spherical beads |
| Particle size (mm) | 0.59±0.05mm |
| <0.3mm ≤0.5% | |
| ≥0.85mm ≤1.0% | |
| Moisture content (%) | 55-65 (OH- Form) |
| Total Capacity(eq/L) | ≥1.0 (OH- Form) |
| Bulk Density ( g/l) | 660-720 |
| Density ( g/l) | 1080-1100 |
| Whole beads count (%) | ≥95 |
| Uniformity coefficient | ≤1.2 |
SEPLITE® Monojet™ SA8500U High Capacity Resin Precautions:
Resins should be stored in sealed containers or bags where temperature was above 0℃ in dry conditions without exposure to direct sunlight.
Do not mix ion exchange resin with strong oxidizing agents; otherwise it will cause violent reactions.
In case of eyes contact with resins, rinse eyes immediately with plenty of water, and consult a specialist.
Material and samples must be disposed according to local regulations.
Dry polymers will expand when become wetted and may cause an exothermic reaction.
Spilled materials may be slippery.
SEPLITE® and Monojet™ are registered trademarks of Sunresin New Materials Co. Ltd., Xi`an
-
This information is general information and may differ from that based on actual conditions. For more information about SEPLITE®resins, please contact SUNRESIN® directly.
Contact Us
