SEPLITE® Monojet™ LSF9780 Ion Exchange Resin
Styrene-divinylbenzene"
SEPLITE® Monojet™ LSF9780 Ion Exchange Resin is a uniform particle size strong acid cation based on a styrene-divinylbeneze copolymer. This resin has a distinctly high operating capacity due to its good kinetics, thus enables a long lifetime with low leakage and regenerants volume which could be very cost-effective for users.
It is suitable for using in food application which requires softening of solutions, such as juices occurring in the production of sugar and pectin, or decationization in different sugar products like starch sugar, cane sugar, beets and gelatin etc.
The resins are produced fully in accordance with the FDA (US Food & Drug Administration), also meeting the regulations prescribed under Resolution ResAP (2004) 3 on ion exchange and adsorbent resins used in the processing of foodstuffs.
Please follow our start-up recommendations which is available upon request, when using our products in food applications.
SEPLITE® Monojet™ LSF9780 Ion Exchange Resin PhysicalandChemical Characteristics:
| Matrix Structure | Gel, Styrene-divinylbenzene |
| Functional group | Sulfonic acid |
| Shipping form | Na+ (H+ is also available) |
| Physical Appearance | Amber to dark brown translucent spherical beads |
| Particle size (mm) | 0.60±0.05mm |
| ＜0.3mm ≤0.1% | |
| ≥0.85mm ≤3.0% | |
| Moisture content (%) | 42-48 (Na+ Form) 50-55 (H+ Form) |
| Total Capacity(eq/L) | ≥2.0 (Na+ Form) ≥1.8 (H+ Form) |
| Bulk Density ( g/l) | 750-850 720-820 |
| Density ( g/l) | 1260-1300 1170-1220 |
| Whole beads count (%) | ≥95 ≥95 |
| Uniformity coefficient | ≤1.1 ≤1.1 |
SEPLITE® Monojet™ LSF9780 Ion Exchange Resin Applications:
-
Softening of aqueous solutions
-
Decationization of solutions of organic products
-
The production of amino acids
SEPLITE® Monojet™ LSF9780 Ion Exchange Resin Precautions:
Resins should be stored in sealed containers or bags where temperature was above 0℃ in dry conditions without exposure to direct sunlight. Do not mix ion exchange resin with strong oxidizing agents; otherwise it will cause violent reactions.
In case of eyes contact with resins, rinse eyes immediately with plenty of water, and consult a specialist. Material and samples must be disposed according to local regulations.
Dry polymers will expand when become wetted and may cause an exothermic reaction. Spilled materials may be slippery.
SEPLITE® and Monojet™ are registered trademarks of Sunresin New Materials Co. Ltd., Xi`an
-
This information is general information and may differ from that based on actual conditions. For more information about SEPLITE® resins, please contact SUNRESIN® directly.
Contact Us
