SEPLITE® LSF971
SEPLITE® LSF971 is a sugar grade macroporous, strong acid cation ion exchange resins.
It was specially developed for deashing of corn sugar and sweeteners, the pores of the LSF 971 has been modified to better suit the sugar application.
The special pore structure and matrix enables its outstanding mechanical resistance to strong osmotic shock. As well, LSF 971 showed superior feather on regeneration efficiency while owning excellent kinetic and strong osmotic shock feather.
The resins are available in both Na form and H form.
The resins are produced fully in accordance with the FDA (US Food & Drug Administration), also meeting the regulations prescribed under Resolution ResAP (2004) 3 on ion exchange and adsorbent resins used in the processing of foodstuffs.
Please follow our start-up recommendations which is available upon request, when using our products in food applications.
SEPLITE® LSF971 Strong Acid Cation Resin Physical and Chemical Characteristics:
| Matrix Structure | Polystyrene Crosslinked with DVB |
| Physical Appearance | White to Cream spheres |
| Particle range (mm) | 0.425-1.25 (98%) |
| Moisture content (%) | 45-55 |
| Bulk Density (g/l) | 770-850 |
| Density (g/l) | 1150-1300 |
| Total capacity (Na form eq/L) | ≥1.8 |
SEPLITE® LSF971 Strong Acid Cation Resin Precautions:
Resins should be stored in sealed containers or bags where temperature was above 0℃ in dry conditions without exposure to direct sunlight. Do not mix ion exchange resin with strong oxidizing agents; otherwise it will cause violent reactions.
In case of eyes contact with resins, rinse eyes immediately with plenty of water, and consult a specialist. Material and samples must be disposed according to local regulations.
Dry polymers will expand when become wetted and may cause an exothermic reaction. Spilled materials may be slippery.
SEPLITE® and Monojet™ are registered trademarks of Sunresin New Materials Co. Ltd., Xi`anThis information is general information and may differ from that based on actual conditions. For more information about
SEPLITE® resins, please contact SUNRESIN® directly.
Contact Us
