SEPLITE® CT330W polymeric catalyst resin for high purity Bisphenol-A reaction production
SEPLITE® CT330W is a spherical beads, gel type strong acid polymeric resin, specially designed as a catalyst used in high purity Bisphenol-A reaction production as catalyst.
SEPLITE® CT330W Polymeric Catalyst Resin Bisphenol-A Reaction Production Physical and Chemical Characteristics:
| Ionic form | H+ |
| Functional group | Sulfonic acid |
| Matrix | Crosslinked polystyrene |
| Physical appearance | opaque beads |
| Total Capacity H+ |
≥1.30 eq/L ≥5.10 eq/kg |
| Water retention % | 64-68 |
| Shipping weight g/ml | 0.70-0.80 |
| Density g/ml | 1.10-1.20 |
| Particle size mm | 0.45-1.00 |
| Harmonic mean size mm | 0.60-0.70 |
| Whole beads count % | ≥95 |
| Uniformity coefficient | ≤1.4 |
| Maximum Operating temperature ℃ | 130 |
| Recommended storage temperature ℃ | Room temperature |
SEPLITE® CT330W Polymeric Catalyst Resin Bisphenol-A Reaction Production Precautions:
Resins should be stored in sealed containers or bags where temperature was above 0℃ in dry conditions without exposure to direct sunlight.
Do not mix ion exchange resin with strong oxidizing agents; otherwise it will cause violent reactions.
In case of eyes contact with resins, rinse eyes immediately with plenty of water, and consult a specialist. Material and samples must be disposed according to local regulations.
Dry polymers will expand when become wet and may cause an exothermic reaction. Spilled materials may be slippery.
SEPLITE® and Monojet™ are registered trademarks of Sunresin New Materials Co. Ltd
This information is general information and may differ from that based on actual conditions. For more information about SEPLITE® resins, please contact SUNRESIN® local sales directly.
Contact Us
