SEPLITE® CT812
SEPLITE® CT812 is a macro porous catalytic resin with beads of uniform size (monodisperse) based on astyrene-divinylbenzene copolymer in the fully regenerated form H+,which is used for all demineralization applications. The uniform beads have both high chemical and osmotic stability. Compared with normal beads resin, the resin with extremely high monodispersity of uniformity coefficient max. 1.1 and very low fines content of max. 0.1% (<0.315 mm) particularly makes low pressure loss.
SEPLITE® CT812 Catalyst Resin Physical and Chemical Characteristics:
| Ionic form | H+ |
| Functional group | Sulfonic acid |
| Matrix | Crosslinked polystyrene |
| Physical appearance | Brown Porous opaque beads |
| Type | Dry | Wet |
| Total capacity mmol/g | ≥4.2 | ≥4.2 |
| Moisture % | 35-45 | 50-58 |
| Shipping weight g/ml | 0.55-0.65 | 0.7-0.8 |
| Density g/ml | 1.0-1.25 | 1.16-1.24 |
SEPLITE® CT812 Catalyst Resin Precautions:
Resins should be stored in sealed containers or bags where temperature was above 0℃ in dry conditions without exposure to direct sunlight.
Do not mix ion exchange resin with strong oxidizing agents; otherwise it will cause violent reactions.
In case of eyes contact with resins, rinse eyes immediately with plenty of water, and consult a specialist. Material and samples must be disposed according to local regulations.
Dry polymers will expand when become wetted and may cause an exothermic reaction. Spilled materials may be slippery.
SEPLITE® and Monojet™ are registered trademarks of Sunresin New Materials Co. Ltd., Xi`an
-
This information is general information and may differ from that based on actual conditions. For more information about SEPLITE® resins, please contact SUNRESIN® directly.
Contact Us
