SEPLITE® MA 939 is a weak base anion resin with acrylic matrix, and that shows excellent removal feature for organic acid, lactic acid or decoloration in fermentation food processing and other applications.
MA 939 is one of the most important acrylic resin in market. The high excellent mechanical strength and good ion exchange kinetics makes it a good resin in different applications, compared with other similar resins in market, the advantage is for a long service life.
SEPLITE® MA 939 presents an outstanding performance on regeneration efficiency, its strong matrix and function group also ensures its good feather for resistance of osmotic shock.
Physical and Chemical Characteristics | |
Matrix Structure | acrylic copolymer |
Shipped form | Free base |
Physical Appearance | Light yellow to yellow spheres |
Particle size (mm) | 0.315-1.25 |
Moisture content (%) | 45-55 |
Total Capacity(eq/L) | ≥2.6 |
Bulk Density ( g/l) | 700-800 |
Density ( g/l) | 1050-1150 |
Fine beads (%) | ≥95 |
High operating capacity
Physical and Chemical stability
Excellent regeneration efficiency
Resins should be stored in sealed containers or bags where temperature was above 0℃ in dry conditions without exposure to direct sunlight.
Do not mix ion exchange resin with strong oxidizing agents; otherwise it will cause violent reactions.
In case of eyes contact with resins, rinse eyes immediately with plenty of water, and consult a specialist.
Material and samples must be disposed according to local regulations.
Dry polymers will expand when become wetted and may cause an exothermic reaction.
Spilled materials may be slippery.
SEPLITE® and Monojet™ are registered trademarks of Sunresin New Materials Co. Ltd., Xi`an
This information is general information and may differ from that based on actual conditions. For more information about SEPLITE® resins, please contact SUNRESIN® directly.
Sunresin has recently signed the "Strategic Cooperation Agreement" with Chengxin Lithium Group Co., Ltd (SZ. 002240) in Chengdu, Southwest China. Zhou Yi, chairman of Chengxin Lithium, and Kou Xiaokang, general manager of Sunresin New Materials Co. Ltd., attended the signing ceremony.
Sunresin has in excess of 10 years’ experience in Direct Lithium Extraction (DLE) with operations in South America, North America, Europe and China. Its proprietary adsorption technology and Simulated Moving Bed (SMB) system has been deployed on different brine grades under different conditions to deliver a low-carbon, environmental-friendly and highly efficient lithium brine extraction solution. Sunresin’s DLE technology is able to extract lithium from a wide variety of brine resources, and deliver higher recoveries with lower costs of processing chemicals and reagents, along with expedited processing times without the need for evaporation ponds.
Sunresin has over 10 years’ experience in Direct Lithium Extraction and has its footprint in brines from Qinghai (China), North America, Europe as well as South America. With its adsorption technology, the company has provided one-stop-shop services to project owners covering project conception and supply of adsorption materials and equipment. Customized solutions and products have been tested successfully with different levels of brine under different conditions across the globe.