SEPLITE® LX6703
SEPLITE® ION EXCHANGER
Acrylic, macroporous type, mixed base anion resins
SEPLITE® LX 6703 is an acrylic, macroporous type anions resins containing both weak and strong base groups. The acrylic matrix ensures it superior removal feature on organic substances from water or similar other solutions. The mixed base of LX6703 makes this resin suitable for removal of both strong and weak acids from solutions.
It also shows good anti-fouling performance during operation.
Matrix | Macroporous type acrylic copolymer |
Physical Appearance | Light yellow to yellow opaque spherical spheres |
Shipping form | Cl or NH4 |
Particle range | 0.425-1.25mm (min,.95%) |
Bulk density | 0.68-0.75g/ml |
Density | 1.07-1.12g/ml |
Total capacity | Min 2.6eq/L |
Moisture Content | 47-57% |
Whole beads count | Min 95% |
Resins should be stored in sealed containers or bags where temperature was above 0℃ in dry conditions without exposure to direct sunlight. Do not mix ion exchange resin with strong oxidizing agents; otherwise it will cause violent reactions.
In case of eyes contact with resins, rinse eyes immediately with plenty of water, and consult a specialist. Material and samples must be disposed according to local regulations.
Dry polymers will expand when become wetted and may cause an exothermic reaction. Spilled materials may be slippery.
SEPLITE® and Monojet™ are registered trademarks of Sunresin New Materials Co. Ltd., Xi`an
This information is general information and may differ from that based on actual conditions. For more information about SEPLITE® resins, please contact SUNRESIN® directly.
Sunresin has recently signed the "Strategic Cooperation Agreement" with Chengxin Lithium Group Co., Ltd (SZ. 002240) in Chengdu, Southwest China. Zhou Yi, chairman of Chengxin Lithium, and Kou Xiaokang, general manager of Sunresin New Materials Co. Ltd., attended the signing ceremony.
Sunresin has in excess of 10 years’ experience in Direct Lithium Extraction (DLE) with operations in South America, North America, Europe and China. Its proprietary adsorption technology and Simulated Moving Bed (SMB) system has been deployed on different brine grades under different conditions to deliver a low-carbon, environmental-friendly and highly efficient lithium brine extraction solution. Sunresin’s DLE technology is able to extract lithium from a wide variety of brine resources, and deliver higher recoveries with lower costs of processing chemicals and reagents, along with expedited processing times without the need for evaporation ponds.
Sunresin has over 10 years’ experience in Direct Lithium Extraction and has its footprint in brines from Qinghai (China), North America, Europe as well as South America. With its adsorption technology, the company has provided one-stop-shop services to project owners covering project conception and supply of adsorption materials and equipment. Customized solutions and products have been tested successfully with different levels of brine under different conditions across the globe.