SEPLITE® LX400 is a food grade weak base anion exchange resin, with matrix structure of styrene divinylbenzene copolymers.
Together with LX100 and LX200, Sunresin deionizer system could be effective applied on deionized juice of apple, pear, pineapple and grapes etc.
Its high bead integrity, total capacity, excellent mechanical strength and good ion exchange kinetics makes it a good general-purpose resin in different applications.
Sunresin adsorbents was produced fully in accordance with the FDA (US Food & Drug Administration), which stated adsorbent polymer can be used for being used in food contact applications.
The same resins were meeting the regulations prescribed under "Council of Europe resolution AP (97) 1 on ion exchange and adsorbent resins used in the processing of food stuffs", which stated when well pre-treated, adsorbent resins was suitable for used in food applications.
Matrix Structure | Crosslinked |
Physical Appearance | Cream white or light-yellow spheres |
Shipping form | Free base |
Particle range | 0.315-0.1.125mm |
Total capacity | 1.6eq/L |
Bulk Density | 650-720g/l |
Density | 1030-1060g/l |
Whole beads count | 0.95 |
Resins should be stored in sealed containers or bags where temperature was above 0℃ in dry conditions without exposure to direct sunlight. Do not mix ion exchange resin with strong oxidizing agents; otherwise it will cause violent reactions.
In case of eyes contact with resins, rinse eyes immediately with plenty of water, and consult a specialist. Material and samples must be disposed according to local regulations.
Dry polymers will expand when become wetted and may cause an exothermic reaction. Spilled materials may be slippery.
SEPLITE® and Monojet™ are registered trademarks of Sunresin New Materials Co. Ltd., Xi`an
This information is general information and may differ from that based on actual conditions. For more information about SEPLITE® resins, please contact SUNRESIN® directly.
IFAT, the world’s leading trade fair for environmental technologies, is the largest platform for water, sewage, waste and raw materials management.
Sunresin has recently signed the "Strategic Cooperation Agreement" with Chengxin Lithium Group Co., Ltd (SZ. 002240) in Chengdu, Southwest China. Zhou Yi, chairman of Chengxin Lithium, and Kou Xiaokang, general manager of Sunresin New Materials Co. Ltd., attended the signing ceremony.
Sunresin has in excess of 10 years’ experience in Direct Lithium Extraction (DLE) with operations in South America, North America, Europe and China. Its proprietary adsorption technology and Simulated Moving Bed (SMB) system has been deployed on different brine grades under different conditions to deliver a low-carbon, environmental-friendly and highly efficient lithium brine extraction solution. Sunresin’s DLE technology is able to extract lithium from a wide variety of brine resources, and deliver higher recoveries with lower costs of processing chemicals and reagents, along with expedited processing times without the need for evaporation ponds.