SEPLITE® MC290 is a polyacrylate macroporous weak acid cation resin.
This resin is characterized by its acrylic matrix and low swelling.
With the matrix, the resin has good resistance to attrition and is very stable to commonly used chemicals.
MC290 is most commonly used in drinking water production and food industry such as sugar, also used in standard mixed bed system.
| Physical and Chemical Characteristics | |
| Matrix Structure | Polyacrylate Crosslinked |
| Physical Appearance | Light yellow spheres |
| Particle range | 0.315-1.25mm (98%) |
| Moisture Content | 50-60% |
| Bulk Density | 720-800g/l |
| Density | 1140-1200g/l |
| Total capacity | ≥4.2eq/L |
Resins should be stored in sealed containers or bags where temperature was above 0℃ in dry conditions without exposure to direct sunlight.
Do not mix ion exchange resin with strong oxidizing agents; otherwise it will cause violent reactions.
In case of eyes contact with resins, rinse eyes immediately with plenty of water, and consult a specialist.
Material and samples must be disposed according to local regulations.
Dry polymers will expand when become wetted and may cause an exothermic reaction.
Spilled materials may be slippery.
SEPLITE® and Monojet™ are registered trademarks of Sunresin New Materials Co. Ltd., Xi`an
This information is general information and may differ from that based on actual conditions. For more information about SEPLITE® resins, please contact SUNRESIN® directly.
On September 21, Jintai Lithium Industry’s Phase-Two 4000t/a lithium carbonate project undertaken by Sunresin started production. Up to now, Sunresin has completed an accumulated 7000t/a lithium carbonate for Jintai Lithium Industry.
Sunresin is delighted to announce that a Memorandum of Understanding ("MoU") has been signed with Anson Resources Limited (ASX: ASN), an Australian-based exploration and development company for industrial minerals, on a long-term alliance for the Paradox lithium project in Utah. According to the MoU, Sunresin will provide equipment, consumables, innovations and technical support services to Anson for the development, design, construction, operation and optimization of Sunresin’s proprietary Direct Lithium Extraction (DLE) technology for the production of battery-grade lithium carbonate at the Paradox project in Utah, USA.
Sunresin is pleased to enter into a Memorandum of Understanding ("MoU") with CleanTech Lithium PLC (AIM: CTL), a lithium exploration and development company in Chile, for the development of lithium extraction projects. According to the MOU, Sunresin will provide pilot scale units to be deployed to site with a view to commencing pilot scale production at Laguna Verde in Chile by early 2023, which aims to demonstrate the potential for a first phase 10,000 MT per annum commercial scale production being planned at CTL’s projects.
Sunresin Park,No.135, jinye Road, Xi’an Hi-tech Industrial Development Zone, Shaanxi-710076, China 
Email us: 
Call us on:
Français
