SUNRESIN STOCK CODE 300487

 seplite@sunresin.com     +86-29-89182091
You are here: Home » Industry » VOCs Treatment

Industry

Products List

Typical Cases

Contact Us

   Sunresin Park,No.135, jinye Road, Xi'an        Hitech Industrial Development Zone,              Shaanxi-710076, China
  E-mail: seplite@sunresin.com 
  Tel: +86-29-89182091

Volatile organic compounds (VOCs) Treatment

Adsorption Technique for Gas Purification

With the widespread use of chemical products in the industry, more and more organic pollutants enter the atmosphere, mainly low-boiling, volatile organic compounds(VOCs). These gases enter the atmosphere and can cause irritation to the human eye, nose and respiratory system, and damage to the internal organs.

 

At present, the more mature methods for treating VOC gas are adsorption, desorption, and catalytic combustion. The method has high purification efficiency, simple operation and wide application range.

Sunresin has exploited the resin for Separation and recycling of low and medium VOCs, including: alkanes, halogenated hydrocarbons, aromatic hydrocarbons, low-carbon alcohols, ketones , esters,and other organic matters.

 
Resin adsorption technology for VOCs treatment:
 
The waste gas resin adsorption technology is mainly used for non-polar or weakly polar volatile organic molecules. It adopts a specifically researched and developed macroporous polymer adsorption resin with uniform pore size, high specific surface area and high strength. By utilizing the non-polar adsorption and intermolecular forces between the internal skeleton molecules of the resin and the volatile organic molecules, the adsorption resin performs highly selective adsorption on the non-polar and weakly polar molecular groups in the waste gas, in order to achieve the purpose of precise adsorption and gas emission compliances.
 
 
Advantages of resin adsorption in VOCs treatment compared to traditional adsorption techniques:
 
Flexibility: adaptation to different industries and different systems from small equipment, skid-mounted equipment, to waste gas treatment system. Flexible cooperation to meet emission requirements.
 
Strength: regular spherical particles with acid, alkali and high-temperature resistance, over 2000 regeneration cycles.
 
Purity: Synthetic styrene structure that has no metal impurities, preventing catalytic polymerization or combustion of unsaturated organics in pores.
 
Efficacy: Over 99.5% removal rate for non-polar and weakly polar VOCs, for emission compliance.
 
Security: Good hydrophobicity. Thanks to its own water content, no need for dry adsorption, avoiding sustained heating due to adsorption exotherm.
 
Sustainability: Longer life cycle, no need for overall replacement, no solid waste generation. Annual replenish around 5%.
 
 
Type of volatile gases suitable for resin adsorption technology:
 
The resin adsorption technology is suitable for most non-polar solvent, including alkanes, alcohol ethers, chlorinated hydrocarbons, ketones, aromatic hydrocarbons, esters, and organic amines.
 
 
Industries that may benefit from resin adsorption for VOCs treatment:
 
1.Pharmaceutical Chemicals
2.Pharmaceutical preparations
3.Pesticide synthesis
4.Tail gas from H2O2 production
5.Chloride Industry
6.Large Chemical Industry
 
In addition to meeting emission requirements, resin adsorption also realizes the efficient recovery of organic volatiles in the waste gas, and has a recovery rate of over 99%.
Typical Application for VOCs Treatment
  • N-hexane,heptane,cyclohexane
  • Trichloroethylene,trichloroethane,dichloromethane
  • Trichloromethane,chlorobenzene
  • Benzene,toluene,xylene
  • Isopropanol,butanol
  • Acetone,butanone,methyl isobutanone,cyclohexanone
  • Ethyl acetate,butyl acetate,acetate
Our Services and support:
 
1.On site test and demonstration;
 
2.Design of treatment plan;
 
3.Supply of adsorption resins;
 
4.Over EPC solution provision; (system design, adsorption resins, system engineering, installation and debugging, staff training)
 
5.Professional technical support and maintenance.

Product list

Our Product List

Latest News

22 2022-09
Sunresin’s 4000t/a Jintai salt lake lithium extraction project put into operation

On September 21, Jintai Lithium Industry’s Phase-Two 4000t/a lithium carbonate project undertaken by Sunresin started production. Up to now, Sunresin has completed an accumulated 7000t/a lithium carbonate for Jintai Lithium Industry.

26 2022-08
Sunresin Signs MOU with Anson Resources for Lithium Project in Utah

Sunresin is delighted to announce that a Memorandum of Understanding ("MoU") has been signed with Anson Resources Limited (ASX: ASN), an Australian-based exploration and development company for industrial minerals, on a long-term alliance for the Paradox lithium project in Utah. According to the MoU, Sunresin will provide equipment, consumables, innovations and technical support services to Anson for the development, design, construction, operation and optimization of Sunresin’s proprietary Direct Lithium Extraction (DLE) technology for the production of battery-grade lithium carbonate at the Paradox project in Utah, USA.

25 2022-08
Sunresin Signs MOU with CleanTech Lithium for Lithium Extraction Project in Chile

Sunresin is pleased to enter into a Memorandum of Understanding ("MoU") with CleanTech Lithium PLC (AIM: CTL), a lithium exploration and development company in Chile, for the development of lithium extraction projects. According to the MOU, Sunresin will provide pilot scale units to be deployed to site with a view to commencing pilot scale production at Laguna Verde in Chile by early 2023, which aims to demonstrate the potential for a first phase 10,000 MT per annum commercial scale production being planned at CTL’s projects.

Here to Provide Complete Separation and Purification Solutions
Sunresin Park,No.135, jinye Road, Xi’an Hi-tech Industrial Development Zone, Shaanxi-710076, China
Call us on:
+86-29-89182091

FOLLOW US

Copyright © Sunresin New Materials Co.Ltd.All Rights Reserved