SEPLITE® Monojet™ SA8500U Ion Exchange Resin is a high-purity, high-capacity resin with uniform particle size designed specifically for the primary, second loop or polishing stage in the ultrapure water preparation. This resin could be available in both OH- form and Cl- form, the ionic conversion rate of OH- form is up to 95%.
The resin is normally paired with SEPLITE® Monojet™ SC7700U in H+ form in mixed bed system.
Physical and Chemical Characteristics | |
Matrix Structure | Gel, Styrene-divinylbenzene |
Functional group | Trimethylammonium |
Shipping form | OH- |
Physical Appearance | White to yellow translucent spherical beads |
Particle size (mm) | 0.59±0.05mm |
<0.3mm ≤0.5% | |
≥0.85mm ≤1.0% | |
Moisture content (%) | 55-65 (OH- Form) |
Total Capacity(eq/L) | ≥1.0 (OH- Form) |
Bulk Density ( g/l) | 660-720 |
Density ( g/l) | 1080-1100 |
Whole beads count (%) | ≥95 |
Uniformity coefficient | ≤1.2 |
Resins should be stored in sealed containers or bags where temperature was above 0℃ in dry conditions without exposure to direct sunlight.
Do not mix ion exchange resin with strong oxidizing agents; otherwise it will cause violent reactions.
In case of eyes contact with resins, rinse eyes immediately with plenty of water, and consult a specialist.
Material and samples must be disposed according to local regulations.
Dry polymers will expand when become wetted and may cause an exothermic reaction.
Spilled materials may be slippery.
SEPLITE® and Monojet™ are registered trademarks of Sunresin New Materials Co. Ltd., Xi`an
This information is general information and may differ from that based on actual conditions. For more information about SEPLITE®resins, please contact SUNRESIN® directly.
IFAT, the world’s leading trade fair for environmental technologies, is the largest platform for water, sewage, waste and raw materials management.
Sunresin has recently signed the "Strategic Cooperation Agreement" with Chengxin Lithium Group Co., Ltd (SZ. 002240) in Chengdu, Southwest China. Zhou Yi, chairman of Chengxin Lithium, and Kou Xiaokang, general manager of Sunresin New Materials Co. Ltd., attended the signing ceremony.
Sunresin has in excess of 10 years’ experience in Direct Lithium Extraction (DLE) with operations in South America, North America, Europe and China. Its proprietary adsorption technology and Simulated Moving Bed (SMB) system has been deployed on different brine grades under different conditions to deliver a low-carbon, environmental-friendly and highly efficient lithium brine extraction solution. Sunresin’s DLE technology is able to extract lithium from a wide variety of brine resources, and deliver higher recoveries with lower costs of processing chemicals and reagents, along with expedited processing times without the need for evaporation ponds.