Special gel type, strong base anion resin, developed for PFAS removal
SEPLITE® LSI106G is a special gel type strong base anion resin developed for PFAS (including PFOA and PFOS) and perchlorate removal, especially from drinking water.
It is supplied in gel form, the special matrix and its tributylamine function group makes it highly selective for the contaminates from drinking water. LSI106G guarantees a higher total capacity and mechanical stability which ensures its better pressure resistance and achieve non-detect level of PFAS under high linear velocity operations.
Physical and Chemical Characteristics:
|Matrix Structure||Gel, Crosslinked|
|Particle range||0.315-1.25 mm (>98%)|
|Total capacity||≥0.6 eq/L|
Figure B Adsorption capacity after regeneration (feed concentration 50 ug/L, flow rate 20 BV/h)
1 cuft valve bag
50 liters drum
200 liters drum
1 cbm supersack
This information is general information and may differ from that based on actual conditions. For more information about SEPLITE® resins, please contact SUNRESIN® directly.
Sunresin has established its Remote Solution Operation and Monitoring Center (RESOM) recently, in an effort not only to offset the impact of the travel restrictions due to the pandemic, but also to develop this innovative initiative to a higher and permanent level in a sustainable manner.
The Seplite LSF983 is very suitable for hardness (calcium and magnesium) removal from potable water(household water filters, pitchers etc), beverage and food applications. Besides hardness, it can also help to reduce certain level of heavy metals as Copper, Lead etc.
The 20th World Pharmaceutical Raw Materials China Exhibition, CPhI China 2020, will take place from December 16th to 18th, 2020, at Shanghai New International Expo Center (SNIEC). Sunresin Invites You to Visit the 20th World Shanghai CPhI Exhibition.