SEPLITE® LSF9870 is an uniform particle size, food grade, strong base type 2 anionic resin based on a macroporous polymer. It is best suited for demineralization and decolorization of solution in food applications.
Due to its macroporous structure, it is especially resilient against organic matter and can be also used for their effective removal ability.
The resins are produced fully in accordance with the FDA (US Food & Drug Administration), also meeting the regulations prescribed under Resolution ResAP (2004) 3 on ion exchange and adsorbent resins used in the processing of foodstuffs.
Please follow our start-up recommendations which is available upon request, when using our products in food applications.
|Matrix Structure||Polystyrene DVB, Macroporous|
|Functional group||Quaternary Ammonium, Type 2|
|Shipping form||Cl- form|
|Physical Appearance||Beige opaque spheres|
|Particle size (mm)||0.60±0.05mm|
|Moisture content (%)||47-57 (Cl- form)|
|Bulk Density ( g/l)||650-750|
|Density ( g/l)||1060-1160|
|Whole beads count (%)||≥95|
|Volume change (Cl- to OH-)|
High operating capacity
Good kinetic performance
Resins should be stored in sealed containers or bags where temperature was above 0℃ in dry conditions without exposure to direct sunlight. Do not mix ion exchange resin with strong oxidizing agents; otherwise it will cause violent reactions.
In case of eyes contact with resins, rinse eyes immediately with plenty of water, and consult a specialist. Material and samples must be disposed according to local regulations.
Dry polymers will expand when become wetted and may cause an exothermic reaction. Spilled materials may be slippery.
SEPLITE® and Monojet™ are registered trademarks of Sunresin New Materials Co. Ltd., Xi`an
This information is general information and may differ from that based on actual conditions. For more information about SEPLITE® resins, please contact SUNRESIN® directly.
All information set forth herein is for informational purposes only. This information is general descriptive(introductory) information of SUNRESIN and its related products, technologies and services. Neither shall constitute the guarantee of SUNRESIN and its affiliates to products, technologies and services in specific fields and specific application conditions results, unless otherwise expressly noted. SUNRESIN and its affiliates assumes no obligation or liability for the information in this document. Customer is responsible for judging whether the information is appropriate for Customer's concrete demand and are obliged to understand whether the use of these products, technologies and services is permitted by the laws and regulations of their countries and relevant regions. Unless expressly stated, no freedom from infringement of use any patent or trademark or intellectual property rights owned by SUNRESIN or its affiliated companies under this document is to be inferred.
On March 7, Forbes China released the list of "2023 China’s 100 Power Businesswomen". Dr. Gao Yuejing, chairwoman of Sunresin, was selected on the list, demonstrating the outstanding contributions of the "she power" in the development of Sunresin.
On December 1, Fang Hongwei, Secretary of the Xi'an Municipal Party Committee, led a delegation to visit Sunresin New Materials Co., Ltd at the Sunresin Campus. Accompanied by Dr. Gao Yuejing, chairwoman of Sunresin, Fang Hongwei and the delegation visited Sunresin’s provincial functional polymer adsorption/separation technology research center.
2022 China Nuclear Energy High Quality Development Conference took place from 15-17 November in Shenzhen World Exhibition & Convention Center. Scientific research institutes, industry associations, operators, service providers, regulators in the field, as well as specially invited experts and scholars, gathered together to discuss the development and opportunities of China's and the world's nuclear power industry.