SUNRESIN STOCK CODE 300487

 seplite@sunresin.com     +86-29-89182091
You are here: Home » Product » Strong Base Anion Exchange Resin » Sugar Production Decolorization » SEPLITE® LSF986

More Products

Application Industries

Contact Us

   Sunresin Park,No.135, jinye Road, Xi'an        Hitech Industrial Development Zone,              Shaanxi-710076, China
  E-mail: seplite@sunresin.com 
  Tel: +86-29-89182091

Availability:

SEPLITE® LSF986

Gel Type 1, Strong Base, ST-DVB, Cl Form
Descriptions

SEPLITE® LSF986 is sugar grade gel type 1, strong basic anion resin, with higher DVB cross linkage than LSF984.

The structure was specially developed to make a balance between total capacity and regeneration efficiency. It also has excellentresistance to osmotic shock and good physical and chemical stability.
The resins are produced fully in accordance with the FDA (US Food & Drug Administration), also meeting the regulations prescribed under Resolution ResAP (2004) 3 on ion exchange and adsorbent resins used in the processing of foodstuffs.
Please follow our start-up recommendations which is available upon request, when using our products in food applications.

SEPLITE® LSF986 Strong Basic Anion Resin PhysicalandChemical Characteristics:

Physical and Chemical Characteristics
MatrixStyrene Divinylbenzene copolymer, Gel
Functional GroupType 1 Quaternary Ammonium
Physical AppearanceLight yellow beads
Particle range (mm)0.4-1.25 (min,95%)
Shipping weight (g/ml)0.66-0.75
Density (g/ml)1.06-1.11
Total capacity (eq/L)≥1.4 (Cl form)
Moisture Content (%)42 - 48% (Cl form)
Volume Change( Cl- → OH-)18% (Max.vol)

SEPLITE® LSF986 Strong Basic Anion Resin Applications:


  • Decolorization in sugar production like syrup, glycerine, grape must, fruit juices

  • Remove organics from water solutions


SEPLITE® LSF986 Strong Basic Anion Resin Precautions


Resins should be stored in sealed containers or bags where temperature was above 0℃ in dry conditions without exposure to direct sunlight. Do not mix ion exchange resin with strong oxidizing agents; otherwise it will cause violent reactions.
In case of eyes contact with resins, rinse eyes immediately with plenty of water, and consult a specialist. Material and samples must be disposed according to local regulations.
Dry polymers will expand when become wetted and may cause an exothermic reaction. Spilled materials may be slippery.

SEPLITE® and Monojet™ are registered trademarks of Sunresin New Materials Co. Ltd., Xi'an
This information is general information and may differ from that based on actual conditions. For more information about SEPLITE® resins, please contact SUNRESIN® directly.



Date Download

Our Product List

Latest News

22 2022-09
Sunresin’s 4000t/a Jintai salt lake lithium extraction project put into operation

On September 21, Jintai Lithium Industry’s Phase-Two 4000t/a lithium carbonate project undertaken by Sunresin started production. Up to now, Sunresin has completed an accumulated 7000t/a lithium carbonate for Jintai Lithium Industry.

26 2022-08
Sunresin Signs MOU with Anson Resources for Lithium Project in Utah

Sunresin is delighted to announce that a Memorandum of Understanding ("MoU") has been signed with Anson Resources Limited (ASX: ASN), an Australian-based exploration and development company for industrial minerals, on a long-term alliance for the Paradox lithium project in Utah. According to the MoU, Sunresin will provide equipment, consumables, innovations and technical support services to Anson for the development, design, construction, operation and optimization of Sunresin’s proprietary Direct Lithium Extraction (DLE) technology for the production of battery-grade lithium carbonate at the Paradox project in Utah, USA.

25 2022-08
Sunresin Signs MOU with CleanTech Lithium for Lithium Extraction Project in Chile

Sunresin is pleased to enter into a Memorandum of Understanding ("MoU") with CleanTech Lithium PLC (AIM: CTL), a lithium exploration and development company in Chile, for the development of lithium extraction projects. According to the MOU, Sunresin will provide pilot scale units to be deployed to site with a view to commencing pilot scale production at Laguna Verde in Chile by early 2023, which aims to demonstrate the potential for a first phase 10,000 MT per annum commercial scale production being planned at CTL’s projects.

Leave a Message

Please send any questions you want to know, we will reply to you immediately.

Here to Provide Complete Separation and Purification Solutions
Sunresin Park,No.135, jinye Road, Xi’an Hi-tech Industrial Development Zone, Shaanxi-710076, China
Call us on:
+86-29-89182091

FOLLOW US

Copyright © Sunresin New Materials Co.Ltd.All Rights Reserved