SEPLITE® Monojet™ LSF9840 Ion Exchange Resin is a food grade gel type 1, stong baic anionics with high-quality resin in uniform particle size designed specifically for use in demineralization and decolorization of solution in food applications.
With its stable chemical and physical properties, the resin is able to yield excellent operation capacity but with low pressure drop, which can also help the users to save the usage of regenerant and rinse water.
The structure is specially developed to make a balance between total capacity and regeneration efficiency. It also has excellent resistance to osmotic shock and good physical and chemical stability.
The resins are produced fully in accordance with the FDA (US Food & Drug Administration), also meeting the regulations prescribed under Resolution ResAP (2004) 3 on ion exchange and adsorbent resins used in the processing of foodstuffs.
Please follow our start-up recommendations which is available upon request, when using our products in food applications.
|Matrix Structure||Gel, Styrene-divinylbenzene|
|Shipping form||Cl- (OH- is also available)|
|Physical Appearance||Light yellow to yellowish translucent spherical beads|
|Particle size (mm)||0.65±0.05mm|
|Moisture content (%)||49-55 (Cl- Form)|
|Total Capacity(eq/L)||≥1.2 (Cl- Form)|
|Bulk Density ( g/l)||660-750|
|Density ( g/l)||1060-1100|
|Whole beads count (%)||≥95|
|Volume change (Cl- to OH-) Max. vol.%||20|
Resins should be stored in sealed containers or bags where temperature was above 0℃ in dry conditions without exposure to direct sunlight. Do not mix ion exchange resin with strong oxidizing agents; otherwise it will cause violent reactions.
In case of eyes contact with resins, rinse eyes immediately with plenty of water, and consult a specialist. Material and samples must be disposed according to local regulations.
Dry polymers will expand when become wetted and may cause an exothermic reaction. Spilled materials may be slippery.
SEPLITE® and Monojet™ are registered trademarks of Sunresin New Materials Co. Ltd., Xi`an
All information set forth herein is for informational purposes only. This information is general descriptive(introductory) information of SUNRESIN and its related products, technologies and services. Neither shall constitute the guarantee of SUNRESIN and its affiliates to products, technologies and services in specific fields and specific application conditions results, unless otherwise expressly noted. SUNRESIN and its affiliates assumes no obligation or liability for the information in this document. Customer is responsible for judging whether the information is appropriate for Customer's concrete demand and are obliged to understand whether the use of these products, technologies and services is permitted by the laws and regulations of their countries and relevant regions. Unless expressly stated, no freedom from infringement of use any patent or trademark or intellectual property rights owned by SUNRESIN or its affiliated companies under this document is to be inferred.