PRODUCT INFORMATION
SEPLITE® Monojet™SC7900N H
Nuclear grade, Uniform particle size, Gel, Strong acid cation resin for water treatment in Nuclear power industry
SEPLITE® Monojet™ SC7900N H Ion Exchange Resin is an extremely high-purity, high-capacity with 16% DVB cation resin in uniform particle size designed specifically for use in nuclear power industry to remove cations for purification and control the pH value.
This resin is supplied in H form and the ionic conversion rate of H form is up to 99%. There's special procedure imposed during the manufacturing in order to assure the highest demand of purity. The uniform particle size gives an optimized balance of pressure drop and exchange kinetics.
When used in a mixed bed, it always paired with SA8800N OH anion exchange resin.
The resin can be used in primary water treatment, fuel pool purification and PWR steam generation blowdown, also can be used in BWR condensate polishing application.
Matrix Structure | Gel, Styrene-divinylbenzene |
Functional group | Sulfonic acid |
Shipping form | H+ |
Ionic conversion H+ (%) | ≥99 |
Physical Appearance | Amber to brownish translucent spherical beads |
Particle size (mm) | 0.55±0.05mm |
Moisture content (%) | 35-43 (H+ Form) |
Total Capacity(eq/L) | ≥2.5 (H+ Form) |
Bulk Density ( g/l) | 800-870 |
Density ( g/l) | 1280-1380 |
Whole beads count (%) | ≥95 |
Uniformity coefficient | ≤1.2 |
Purity (Metals in dry basis) | Na ≤ 20 mg/kg |
K ≤ 20 mg/kg | |
Fe ≤ 20 mg/kg | |
Cu ≤ 5 mg/kg | |
Co ≤ 5 mg/kg | |
Ca ≤ 10 mg/kg | |
Mg ≤ 10 mg/kg | |
Al ≤ 10 mg/kg | |
Hg ≤ 20 mg/kg | |
Heavy Metals (as Pb) ≤ 10 mg/kg |
Resins should be stored in sealed containers or bags where temperature was above 0℃ in dry conditions without exposure to direct sunlight. Do not mix ion exchange resin with strong oxidizing agents; otherwise it will cause violent reactions.
In case of eyes contact with resins, rinse eyes immediately with plenty of water, and consult a specialist. Material and samples must be disposed according to local regulations.
Dry polymers will expand when become wetted and may cause an exothermic reaction. Spilled materials may be slippery.
SEPLITE® and Monojet™ are registered trademarks of Sunresin New Materials Co. Ltd., Xi`an
This information is general information and may differ from that based on actual conditions. For more information about SEPLITE® resins, please contact SUNRESIN® directly.
IFAT, the world’s leading trade fair for environmental technologies, is the largest platform for water, sewage, waste and raw materials management.
Sunresin has recently signed the "Strategic Cooperation Agreement" with Chengxin Lithium Group Co., Ltd (SZ. 002240) in Chengdu, Southwest China. Zhou Yi, chairman of Chengxin Lithium, and Kou Xiaokang, general manager of Sunresin New Materials Co. Ltd., attended the signing ceremony.
Sunresin has in excess of 10 years’ experience in Direct Lithium Extraction (DLE) with operations in South America, North America, Europe and China. Its proprietary adsorption technology and Simulated Moving Bed (SMB) system has been deployed on different brine grades under different conditions to deliver a low-carbon, environmental-friendly and highly efficient lithium brine extraction solution. Sunresin’s DLE technology is able to extract lithium from a wide variety of brine resources, and deliver higher recoveries with lower costs of processing chemicals and reagents, along with expedited processing times without the need for evaporation ponds.