SEPLITE® LSF983 S is a food grade, polyacrylate macroporous weak acidic cation resin.
LSF983 S is suitable for using the application of food industry like decationisation and softening in sugar beet, sugar cane, starch sugar and glycerin etc., or drinking water production.
Manufacturing process is fully compliant with European Union regulation on Ion Exchange Resins and Adsorbers used in the processing of foodstuffs ResAP 2004(3).
Please follow our start-up recommendations which is available upon request, when using our products in food applications.
Polyacrylate-DVB Crosslinked, Macroporous
Light yellow spheres
Particle range (mm)
Effective particle size(mm)
Shipping weight (g/ml)
Total capacity (eq/L)
Moisture Content (%)
Volume change H→Na
Resins should be stored in sealed containers or bags where temperature was above 0℃ in dry conditions without exposure to direct sunlight. Do not mix ion exchange resin with strong oxidizing agents; otherwise it will cause violent reactions.
In case of eyes contact with resins, rinse eyes immediately with plenty of water, and consult a specialist. Material and samples must be disposed according to local regulations.
Dry polymers will expand when become wetted and may cause an exothermic reaction. Spilled materials may be slippery.
SEPLITE® and Monojet™ are registered trademarks of Sunresin New Materials Co. Ltd.
•This information is general information and may differ from that based on actual conditions. For more information about SEPLITE® resins, please contact SUNRESIN® directly.
All information set forth herein is for informational purposes only. This information is general descriptive(introductory) information of SUNRESIN and its related products, technologies and services. Neither shall constitute the guarantee of SUNRESIN and its affiliates to products, technologies and services in specific fields and specific application conditions results, unless otherwise expressly noted. SUNRESIN and its affiliates assumes no obligation or liability for the information in this document. Customer is responsible for judging whether the information is appropriate for Customer's concrete demand and are obliged to understand whether the use of these products, technologies and services is permitted by the laws and regulations of their countries and relevant regions. Unless expressly stated, no freedom from infringement of use any patent or trademark or intellectual property rights owned by SUNRESIN or its affiliated companies under this document is to be inferred.
On September 21, Jintai Lithium Industry’s Phase-Two 4000t/a lithium carbonate project undertaken by Sunresin started production. Up to now, Sunresin has completed an accumulated 7000t/a lithium carbonate for Jintai Lithium Industry.
Sunresin is delighted to announce that a Memorandum of Understanding ("MoU") has been signed with Anson Resources Limited (ASX: ASN), an Australian-based exploration and development company for industrial minerals, on a long-term alliance for the Paradox lithium project in Utah. According to the MoU, Sunresin will provide equipment, consumables, innovations and technical support services to Anson for the development, design, construction, operation and optimization of Sunresin’s proprietary Direct Lithium Extraction (DLE) technology for the production of battery-grade lithium carbonate at the Paradox project in Utah, USA.
Sunresin is pleased to enter into a Memorandum of Understanding ("MoU") with CleanTech Lithium PLC (AIM: CTL), a lithium exploration and development company in Chile, for the development of lithium extraction projects. According to the MOU, Sunresin will provide pilot scale units to be deployed to site with a view to commencing pilot scale production at Laguna Verde in Chile by early 2023, which aims to demonstrate the potential for a first phase 10,000 MT per annum commercial scale production being planned at CTL’s projects.