SUNRESIN STOCK CODE 300487

 seplite@sunresin.com     +86-29-89182091
You are here: Home » Product » Mixed Bed Ion Exchange » Ultral Pure Water Final Polishing » SEPLITE® Monojet™ MB615U

More Products

Application Industries

Contact Us

   Sunresin Park,No.135, jinye Road, Xi'an        Hitech Industrial Development Zone,              Shaanxi-710076, China
  E-mail: seplite@sunresin.comt 
  Tel: +86-29-89182091

SEPLITE® Monojet™ MB615U

Cation/anion Volume ratio 1:1

Descriptions

SEPLITE® MB615U is an ultrapure, ready to use mixed bed resin, comprising strongly acidic cation (SAC) and strongly basic (type I) gel anion (SBA) resins.
The resins are highly regenerated and specially cleaned in order to comply with the specifications of producing high purified water, such as low TOC leaching, high operating capacity for one-use application.
The resins are pre-mixed corresponding to the total capacity of the individual components to an equivalent ratio of 1:1.
With its uniform particle size which enables excellent kinetic performance and high service flow rate, the low fines result in very low pressure losses compared with Gaussian distributed resins.

PhysicalandChemical Characteristics:

Matrix Structure Gel, Styrene-divinylbenzene
Functional group Sulfonic acid / quaternary amine
Shipping form H+ / OH-
Physical Appearance Amber to brown translucent spherical beads
Particle size (mm) Cation: 0.65±0.05mm
Anion: 0.63±0.05mm
Moisture content (%) 44-54 (H+ Form) 54-64 (OH- Form)
Total Capacity(eq/L) ≥1.9 (H+ Form) ≥1.0 (OH- Form)
Regenerated Conversion (%) >99 >95
Cation/Anion chemical equivalent ratio 1:1
Bulk Density ( g/l) 690-740
Uniform coefficient <1.2 <1.2
TOC leakage* <10 ppb after 40 BV rinsing at 30 BV/h
Resistivity* >18 MΩ.cm after 15 BV rinse at 30 BV/h

Note* Recommended influent water quality: Inlet Resistivity > 16 MΩ.cm, TOC < 20 ppb

Precautions:

Resins should be stored in sealed containers or bags where temperature was above 0℃ in dry conditions without exposure to direct sunlight. Do not mix ion exchange resin with strong oxidizing agents; otherwise it will cause violent reactions.
In case of eyes contact with resins, rinse eyes immediately with plenty of water, and consult a specialist. Material and samples must be disposed according to local regulations.
Dry polymers will expand when become wetted and may cause an exothermic reaction. Spilled materials may be slippery.

SEPLITE® and Monojet™ are registered trademarks of Sunresin New Materials Co. Ltd., Xi`an

  • This information is general information and may differ from that based on actual conditions. For more information about SEPLITE® resins, please contact SUNRESIN® directly.

All information set forth herein is for informational purposes only. This information is general descriptive(introductory) information of SUNRESIN and its related products, technologies and services. Neither shall constitute the guarantee of SUNRESIN and its affiliates to products, technologies and services in specific fields and specific application conditions results, unless otherwise expressly noted. SUNRESIN and its affiliates assumes no obligation or liability for the information in this document. Customer is responsible for judging whether the information is appropriate for Customer's concrete demand and are obliged to understand whether the use of these products, technologies and services is permitted by the laws and regulations of their countries and relevant regions. Unless expressly stated, no freedom from infringement of use any patent or trademark or intellectual property rights owned by SUNRESIN or its affiliated companies under this document is to be inferred.

Our Product List

Latest News

01 2020-12
A Better Choice for Tungsten and Molybdenum Separation

Sunresin has set up special topics and established a special research team based on customers’ needs to conduct research and analysis on the element composition and existing technology of tungsten leaching solution, and successfully developed sepcial resin Seplite® LSC680 for tungsten and molybdenum separation as well as the matching process.

27 2020-11
Acetone Purification and Cycling (Methylamine removal), solvent in the production of PPS (polyphenylene sulfide)

The ion exchange resin (IER) method is very excellent and efficient for acetone purification. Acetone will pass cation exchange resins first and then the anion exchange resins, more than 95% methylamine will be removed.

24 2020-11
Sunresin awarded as Asia's Best Under A Billion by Forbes 

On November 23, 2020,Forbes announced Asia’s Best Under A Billion 2019 list. Sunresin was honored to be selected. The promulgation ceremony originally scheduled to be held in Bangkok, Thailand, was carried out online due to continuous spreading pandemic.

Leave a Message
Here to Provide Complete Separation and Purification Solutions
Sunresin Park,No.135, jinye Road, Xi’an Hi-tech Industrial Development Zone, Shaanxi-710076, China
Call us on:
+86-29-89182091

FOLLOW US

Copyright © Sunresin New Materials Co.Ltd., Xi'an All Rights Reserved