SUNRESIN STOCK CODE 300487

 seplite@sunresin.com     +86-29-89182091
You are here: Home » Product » Mixed Bed Ion Exchange » Industrial demineralization » SEPLITE® MB10

More Products

Application Industries

Contact Us

   Sunresin Park,No.135, jinye Road, Xi'an        Hitech Industrial Development Zone,              Shaanxi-710076, China
  E-mail: seplite@sunresin.comt 
  Tel: +86-29-89182091

SEPLITE® MB10

Cation/anion Volume ratio 1:1

Descriptions

SEPLITE®MB10 is a ready to use mixed bed resin, consisted of strong acid cation resin and strong base type 1 anion resins
The resins were prepared with fixed ratio, with the aim of producing high quality purified water.
It could be loaded either in small cartridges and big industrial resin columns.
By using this mixed bed resin, projects requiring high demineralized water and low silica, TOC could be handled.
This resin is widely used in EDM application.

Physical and Chemical Characteristics:

Physical and Chemical Characteristics
Matrix StructurePolystyrene Crosslinked with DVB
Shipped formH+/OH-
Physical AppearanceMixture of white to yellow spheres
Cation/Anion ratio50:50
Functional GroupSulphonic acid and trimethylammonium
Particle size (mm)0.315-1.25
Moisture content (%)57-67
Total Capacity(eq/L)1.9/1.0
Bulk Density (g/l)700-770
Density (g/l)1100-1200
Whole beads count (%)≥95


Precautions:
Resins should be stored in sealed containers or bags where temperature was above 0℃ in dry conditions without exposure to direct sunlight.
Do not mix ion exchange resin with strong oxidizing agents; otherwise it will cause violent reactions.
In case of eyes contact with resins, rinse eyes immediately with plenty of water, and consult a specialist.
Material and samples must be disposed according to local regulations.
Dry polymers will expand when become wetted and may cause an exothermic reaction.
Spilled materials may be slippery.

SEPLITE® and Monojet™ are registered trademarks of Sunresin New Materials Co. Ltd., Xi`an

  • This information is general information and may differ from that based on actual conditions. For more information about SEPLITE® resins, please contact SUNRESIN® directly.


Our Product List

Latest News

01 2020-12
A Better Choice for Tungsten and Molybdenum Separation

Sunresin has set up special topics and established a special research team based on customers’ needs to conduct research and analysis on the element composition and existing technology of tungsten leaching solution, and successfully developed sepcial resin Seplite® LSC680 for tungsten and molybdenum separation as well as the matching process.

27 2020-11
Acetone Purification and Cycling (Methylamine removal), solvent in the production of PPS (polyphenylene sulfide)

The ion exchange resin (IER) method is very excellent and efficient for acetone purification. Acetone will pass cation exchange resins first and then the anion exchange resins, more than 95% methylamine will be removed.

24 2020-11
Sunresin awarded as Asia's Best Under A Billion by Forbes 

On November 23, 2020,Forbes announced Asia’s Best Under A Billion 2019 list. Sunresin was honored to be selected. The promulgation ceremony originally scheduled to be held in Bangkok, Thailand, was carried out online due to continuous spreading pandemic.

Leave a Message
Here to Provide Complete Separation and Purification Solutions
Sunresin Park,No.135, jinye Road, Xi’an Hi-tech Industrial Development Zone, Shaanxi-710076, China
Call us on:
+86-29-89182091

FOLLOW US

Copyright © Sunresin New Materials Co.Ltd., Xi'an All Rights Reserved