SUNRESIN STOCK CODE 300487     +86-29-89182091
You are here: Home » Product » Adsorbent Resin » Protein Recovery » SEPLITE® LXA1180

More Products

Application Industries

Contact Us

   Sunresin Park,No.135, jinye Road, Xi'an        Hitech Industrial Development Zone,              Shaanxi-710076, China
  E-mail: seplite@sunresin.comt 
  Tel: +86-29-89182091


Nonionic, hydrophobic, cross-linked polymeric adsorbent

SEPLITE® adsorbent
Nonionic, hydrophobic, cross-linked polymer

SEPLITE® LXA1180 is a nonionic, hydrophobic, cross-linked polymeric adsorbent

Its adsorption function came from its macroreticular pore structure, high surface area, designed pore size distribution, and aromatic nature of its pore surface.

SEPLITE® LXA1180 has excellent osmotic and thermal stability, it could sever a long-life cycle by regenerations.

It could be used for the selective separation of a wide variety of large organic molecules from aqueous solutions or polar solvents such as plant extractsantibiotics, and fermentation products.

Advantages of Seplite LXA1180:

1) Excellent loading and eluting performance
2) Especially suitable for adsorption for large
3) Easy to clean, good anti-fouling feather


1) Antibiotic recovery;
2) Vitamin production;
3) Steroid production;
4) Protein recovery;
5) Herbal extracts.

Sunresin adsorbents was produced fully in accordance with the FDA (US Food & Drug Administration), which stated adsorbent polymer can be used for being used in food contact applications.

The same resins were meeting the regulations prescribed under “Council of Europe resolution AP (97) 1 on ion exchange and adsorbent resins used in the processing of food stuffs”, which stated when well pre-treated, adsorbent resins was suitable for used in food applications.

Physical and Chemical Characteristics:

MatrixCrosslinked polymer
Physical AppearanceWhite spheres
Particle Size0.315-1.25mm (95%)
Bulk density650-750g/l
Surface area>750 m2/g
Temperature limitation0-110℃
PH range0-14

Resins should be stored in sealed containers or bags where temperature was above 0℃ in dry conditions without exposure to direct sunlight. Do not mix ion exchange resin with strong oxidizing agents; otherwise it will cause violent reactions.

In case of eyes contact with resins, rinse eyes immediately with plenty of water, and consult a specialist. Material and samples must be disposed according to local regulations.

Dry polymers will expand when become wetted and may cause an exothermic reaction. Spilled materials may be slippery.

SEPLITE® and Monojet™ are registered trademarks of Sunresin New Materials Co. Ltd., Xi`an

  • This information is general information and may differ from that based on actual conditions. For more information about SEPLITE® resins, please contact SUNRESIN® directly.

Our Product List

Latest News

27 2020-11
Acetone Purification and Cycling (Methylamine removal), solvent in the production of PPS (polyphenylene sulfide)

The ion exchange resin (IER) method is very excellent and efficient for acetone purification. Acetone will pass cation exchange resins first and then the anion exchange resins, more than 95% methylamine will be removed.

24 2020-11
Sunresin awarded as Asia's Best Under A Billion by Forbes 

On November 23, 2020,Forbes announced Asia’s Best Under A Billion 2019 list. Sunresin was honored to be selected. The promulgation ceremony originally scheduled to be held in Bangkok, Thailand, was carried out online due to continuous spreading pandemic.

25 2019-10
Pretreatment of Anion Exchange Resin

Sunresin, anion exchange resin suppliers, gives a plan for ion exchange resin pretreatment. Let's take a look at it.

Leave a Message
Here to Provide Complete Separation and Purification Solutions
Sunresin Park,No.135, jinye Road, Xi’an Hi-tech Industrial Development Zone, Shaanxi-710076, China
Call us on:


Copyright © Sunresin New Materials Co.Ltd., Xi'an All Rights Reserved